FEVICOL AC DUCT KING is a Synthetic Rubber based adhesive specially developed to bond various insulation material in HVAC & R industry.
FEVICOL AC DUCT KING is recommended to bond Nitrile Rubber or XLPE with Galvanized Iron or Aluminium duct surface for insulating AC Ducts, Chilled Water Pipe lines, and Underdeck / Overdeck in various industrial & residential projects.
The product can be conveniently applied in low ventilated sites at remote places, as the smell is very mild.

Industry first Adhesive product exclusively for Ducting and Chilled Water Piping.
One adhesive for multiple application.
Higher coverage & hence low adhesive quantity required
Very Mild smell ensures the applicators and users will not be harmed
No added Benzene ensures that the Health of the applicators and users is not harmed
Excellent tack
High Spreadability & ease of application
Strong Bond durability (Aging resistance)

Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
Stir the adhesive well before use to have a homogeneous material prior to application.
Apply Fevicol AC Duct King on both the substrates uniformly by spreader / brush. First on Non porous substrate & then on porous substrates.
When Glass Wool/Rock Wool substrates are bonded, application of adhesive is done only on Duct/Pipe/Concrete substrates
Once the adhesive becomes touch dry (When tack is developed), press both the substrates together ensuring uniform contact so that air pockets are not formed.
Cure for 24 hrs at ambient temperature

FEVICOL AC DUCT KING LAG COATING AF 5590 is an Anti Fungal, Weathering Resistant, Vapour Barrier, Fire Resistant Coating.
It is specially developed for protecting Insulated Duct, Chilled Water & VRV Pipes against Fire & Flame, Mechanical Damage, Harmful UV, Fungal growth & Condensation.

Reduction in Water vapour penetration on insulated surfaces thereby increasing the life of the system
Prevents the Fungal growth / Water seepage on the insulated surface.
Prevents formation of surface cracks on Insulated Surfaces due to Weathering.
Gives the protection against UV / Atmospheric Heat, which reduces the maintenance and re-working and re-installation costs.
Excellent protection against fire and smoke hazards
Gives a High Surface strength to the Ducting / Chilled Water Piping
Faster and Cost Effective site completion as compared to Sand Cement Plaster and Aluminum cladding
Available in Multiple shades to suit the Legend and Facade requirement
Protection against bird perching, Pre and Post Insulation damages
Prevents the probable ingress of VOC present in low engineered adhesive through the Supply/Return Air because of the tight vapour barrier coating.

FEVICOL AC DUCT KING OPTIMA is a Synthetic Rubber based, Low VOC product specially developed for various applications in HVAC industry.
FEVICOL AC DUCT KING OPTIMA is an excellent adhesive to bond Nitrile Rubber to Galvanized Iron or Aluminum duct surface.
The product can be conveniently applied in low ventilated sites at remote places, as the smell is very mild.

Low VOC product which Improves the IAQ.
No added Benzene Formulation, ensures that the product is harmless, Safe to use & Handle.
Mild smell of the product does not cause any irritation to the occupants / applicators and Excellent for Low Ventilated Areas.
Excellent Spread and ease of application
Fast Drying and Strong Bonding – Very strong Bonding ensuring zero reworking costs
Low Application Cost – Keeps the costs under control

Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
Stir the adhesive well before use to have a homogeneous material prior to application.
Apply Fevicol AC Duct King Optima on both the substrates uniformly by brush / spreader. First on Non porous substrate & then on porous substrates.
Once the adhesive becomes touch dry (when tack is developed), press both the substrates together ensuring uniform contact so that air pockets are not formed
Cure for 24 hrs at ambient temperature

FEVICOL AC PREFAB is a new generation Synthetic Rubber based adhesive, specially developed for bonding Pre Insulated Panels made of PIR, PU foam, Phenolic foam etc.
The Adhesive is fast drying adhesive & develops quick grab which is preferred for faster rate of fabrication.
Fevicol AC Prefab can be easily applied at all ambient conditions by spreader/brush. It is an ideal adhesive for quick assembly of pre fabricated panels for on site construction of AC ducts.

No added Benzene Formulation
Faster Drying at ambient temperature
Quick Grab development.
Excellent Spreadability
Safe to use & Handle
Long shelf Life

Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
Apply the adhesive by spreader/Brush in thin uniform layer on both the surfaces of PIR, PU/ Phenolic Foam surfaces
Allow to develop the tack. Allow an open time of 3-4 minutes. If the surface is porous apply a second coat & allow to dry for 3-4 minutes.
When tack is developed, press firmly & uniformly by hand taking care that no air pockets are formed
Allow to Cure the duct assembly for 24 hrs at ambient temperature

FEVICOL AC DUCT KING ECO FRESH is a water based environment friendly, synthetic resin adhesive, specially developed for ducting, chilled water piping and Underdeck / Overdeck insulation applications in HVAC & R Industry.
FEVICOL AC DUCT KING ECO FRESH is a Green and Safe adhesive because it has a low VOC and is Non Flammable.
It is extremely ideal for Green Certified projects as well as Safety Priority projects. FEVICOL AC DUCT KING ECO FRESH is Flame Resistant adhesive which does not catch fire while wet or cured.

Air conditioned Area for Ducting with Nitrile Rubber, Glass Wool, Rock Wool and Chilled Water Piping with Glass Wool, Rock Wool
Under deck / Over deck Insulation with Nitrile Rubber, EPS, Glass Wool, Rock Wool (To be applied along with mechanical fasteners).

Fevicol AC Duct king Eco Fresh conforms to ASTM E 84 test for Low Flame Spread Index
Fevicol AC Duct king Eco Fresh is certified as a Class A product by Exova Warringtonfire, a renowned testing UK Based testing agency
Fire Resistant Water Based Formulation - Makes the Ducting / Chilled Water Piping safer against Fire hazards.
Very LOW VOC ( < 5 gms / litre ), excellent for Green Certified projects
Ideal for Improving the Indoor Air Quality ( IAQ ) as per the Green Building Standards
Mild Smell and Low Toxicity - Excellent for Low Ventilated Areas and Safe for Occupants / Applicators
Excellent Spreadability - Lower application costs ensures a better Cost Benefit than rubber based adhesive.
Low Application Cost – Higher coverage & hence low adhesive cost per unit area
Excellent tack - Longer Tack retention/open time
Strong Bonding – Very strong Bonding ensuring zero reworking costs.

Clean the substrates to be bonded so that they are free from Dust/Rust/Oil/Moisture
Stir the adhesive well before use to have a homogeneous material prior to application
Apply the adhesive by spreader only in thin uniform layer on both the substrates. Do not use brush.
For faster tack development & bonding, thin layer of adhesive is mandatory
Once the tack is developed, bonding of the substrates can be done even after 2 hrs unlike rubber based adhesive
Allow to develop tack (Best judged by change in colour from whitish to colourless)
Press it uniformly by hand pressure taking care that no air pockets are formed
Cure for 24 hrs at ambient temperature
When glass wool/rock wool substrates are bonded, application of adhesive is done Only on Duct/Pipe/Concrete substrates

FEVICOL SR 998 is a Superior Adhesive recommended to bond Nitrile Rubber or XLPE to Galvanized Iron, Aluminium duct surface, Mild Steel for insulating AC Ducts, Chilled Water Pipe Lines and Underdeck / Overdeck in various industrial & residential projects.
FEVICOL SR 998 is a Synthetic Rubber adhesive specially developed taking into consideration the application needs & performance requirements of HVAC & R Industry.

AC Ducting / Air Ventilation System - To bond Nitrile Rubber, XLPE, Glass Wool /Rock Wool, PUF to Duct surface
Chilled Water piping - To bond Nitrile Rubber, XLPE and Glass Wool/Rock Wool, PUF to MS pipe lines.
Acoustic Insulation - To Bond Nitrile Rubber to Concrete walls, Wood / Metal surfaces & Duct lining
Wall panelling for cold storages - To bond Nitrile Rubber, XLPE, Glass Wool/Rock Wool to smooth Concrete wall surface.
Under deck/Over deck Insulation - To bond Nitrile Rubber, XLPE, Glass Wool/Rock Wool, PUF, PIR/Phenolic Foam to smooth Concrete wall surface (Mechanical fasteners are recommended for under deck insulation)
Brine Chilled Water Piping - To bond Nitrile Rubber, XLPE to MS pipe lines. Service temperature of water up to -20°C
Thermal Storage System Tanks - To bond Nitrile Rubber, XLPE to MS Tanks.

No added Benzene Formulation
Excellent Performance for Curved surfaces
Excellent Spring back Resistance.
Superior performance at Sub Zero Temperatures
Excellent Water and Heat Resistance
Excellent Spreadability & ease of application
Rapid and Strong strength development
Excellent Bond durability (aging resistance)
Mild Smell and hence can be used in Low Ventilated sites or remote places.
Ideal for Refrigeration applications

Clean the substrates to be bonded so that they are free from Dust / Rust / Oil etc
Stir the adhesive well before use
Apply Fevicol SR 998 on both the substrates uniformly by spreader / brush. First on Non porous substrate & then on porous substrates.
When Glass Wool/Rock Wool substrates are bonded, application of adhesive is done Only on Duct/Pipe/Concrete substrates
Once the adhesive becomes touch dry( when tack is developed), press both the substrates together ensuring uniform contact so that air pockets are not formed
Cure for 24 hrs at ambient temperature.