Partition Walls and Party Walls

1. Cut rockwool Ratts to size using a sharp knife or saw, ensuring a snug fit between wall studs.
2. Create a friction-fit by slightly oversizing the batts, if needed.
3. Seal any remaining gaps or joints with rockwool sealant to enhance thermal and acoustic performance.

Pipe and Enuipment Insulation

1. Measure the pipe, duct, or vessel and cut rockwool pipe sections or wrap loose wool to fit tightly.
2. Secure the insulation in place using wire mesh, metal straps, or
   adhesive tape.
3. Seal all joints and edges with a compatible sealant or tape to prevent air and moisture infiltration.